Fall through bottom/warped to top of the map

Jeff McGee

Well-Known Member
Joined
Aug 14, 2014
Messages
36
Likes
19
Points
415
Age
45
Location
Texas
#1
I fell through the bottom/warped to top of the map today. I've had this happen once before, but it doesn't really effect anything except the Top Speed indicator. I don't think I hit 283285mph, but it would be cool.


Update: After some more playing this only seems to happen when I hit the home button and my plane goes crashing into the parts. It doesn't always warp you to the top of the map and sometimes you just fall forever The top speed hasn't gone wacky again though.
 
Last edited:

Jeff McGee

Well-Known Member
Joined
Aug 14, 2014
Messages
36
Likes
19
Points
415
Age
45
Location
Texas
#3
I don't think it matters. I was also moving when I clicked, the home button. I haven't had it happen on any of my smaller builds, just the ones with quite a few parts. I'll see if i can recreate it later today and let you know about the distance from start.
 
Likes: skedra

Jeff McGee

Well-Known Member
Joined
Aug 14, 2014
Messages
36
Likes
19
Points
415
Age
45
Location
Texas
#4
I finally had this happen again today on the Hoover Bother map. I was close to home, actually trying to turn around and ran into the parts then started falling. The top speed jumped to 4455 mph when I warped or whatever.
 

zidel

Well-Known Member
Joined
Aug 14, 2014
Messages
40
Likes
13
Points
410
#5
Not sure if this is the same bug or not, but the symptom is the same so I'm adding it here.

This happened to me just now after creating the rotating base part. In my case I got a greenish background, and the build mode message you get when falling over. After pressing B I got the same orange background as in the first post, the message didn't disappear and the game didn't react to wasd, b, mouse etc.

After pressing esc then "restart main game" I started on what looked like the normal map, except almost all the resources were missing. After going to the main menu then restarting the map was fine again.

Building the base part again later worked fine, but made the base vibrate horribly until the part 'settled' above the fabricator. The attached log is from after the bug and the two restarts described above.
 

Attachments