Bacon, Inc

What should I build?

  • Flyers

  • MTs

  • Land Techs

  • Other: Specify Below


Results are only viewable after voting.

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#21
Here is my really expensive destroyer tech, made of mostly HE, but with GC batteries and GSO mobile base
HE Destroyer.png
And some artillery to shoot down those planes wit no batteries and no bubbles ( has mobile base ): Plane Shooter.png
And a Venture flyer, has no shields or bubbles despite the previous tech ( extra fuel tank not included ) Venture Flyer 2.png
 

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#22
Here is my airship:
FastFlyer Mk4.png
Use shift and hold w until it goes sideways. Going stratght downwards will get ( I think ) a speed of 259mph.
Looks funny
And a tech to clean up messes:
Sweeper.png
 

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#23
Got bored so I made: A furnace The Furnace Mk9.png
Just out some blocks in it

And a cookie:
COOKIE V2.png
You can stuff it inside the furnace

And a turret with ridiculos amounts of lasers Cab Machine Gun V2.png
Very hard to get in campaign. Shoots a lot of lasers though. Has the cab lasers, stud lasers, and the Coil lasers
 
Last edited:

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#24
Some more techs:
Sandcrawler ( kind of )
Sandcrawler.png
Put upside-down GC scoop in the big opening at the front to have the ability to go into artillery mode. Has mobile base.
Ugly Heil Mk3
Ulgy Heli Mk3.png
Not made for combat. Has 6 cruises, 2 HE cab weapons, and 2 laser targeting thingys.

My attempt at a WW2 Tank WW2 Tank.png
Nothing impressive about this
 

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#25
I've got a train multi tech project work in progress right now.

NOTE: I do not have R&D, so pics may be bad and I can only use the VEN brackets
The VEN bracket on the VEN block is to fill in the hole in the chain
The HE brcket is to make the tech stay still if put on AI

So far, here are all the techs:

Engine:
Train Engine2.png
Heavy Gunner:
Train Heavy Gunner.png
And the Minigunner
Train Minigunner.png
 
Likes: reaperx1

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#26
Mini Carrier:
Train Mini Carrier3.png
Some AI techs to go inside them:
Tech Minion.png
They may wiggle a bit. Use build beam to move inside the carrier. You have to manually move them out.

And a mega carrier:
Train Mega Carrier.png
Techs it can store will be on next 2 posts.
 

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#27
Scout bike:
Scout Bike.png
Goes on lower part of the mega carrier. 4 of them can fit

Mini Tank:
Mini Tank.png
Goes on lower part of carrier. 2 can fit

And Medium Tank:
Medium Tank2.png
Goes on lower part of carrier. Only one can fit
 
Likes: reaperx1

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#28
Mini heli:
Mini Heli.png
Goes on top part of carrier. Around 7-9 of them can fit. Ultimate troll weapon.

Frieghter:
Train Frieghter2.png
Carries resource chuncks and components

Anti-Air Car:
Train Anti Air3.png
 
Likes: reaperx1

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#33
But wait... what are those brackets fro, you might ask?
Well, for putting the turrets on ( they may fall off if you fly upside down for too long )
Side Turret Loader7.png Top Turret Loader8.png Rear Turret Loader4.png
To load:
Rear: Remove the long bracket and squeeze the turret in. Then put the bracket back. Then remove the venture block from the placer

Side: Move the four block and the long bracket attached to the right angle bracket. Then use the build beam to drop the turret so that it is on both of the remaining brackets and fits perfectly with the body of the plane as well as the other four block ( NOTE: I recommend moving the four block that is closest to the rear of the plane ). Put the four block that you moved earlier back in position. Use the build beam once more to make sure that the HE weapon pylon the clamping the turret. Once done, put the long bracket back on the right angle bracket and remove the venture block from the placer

Top: IMPORTANT: this will only work on the left side of the plane
Move the two long brackets on the top out of the way. Then move the bracket on the loader to where the the left wing and the body of the plane intersect. Then get the turret in place ( oozes should be facing the front ) using the build beam. Release the Build Beam. Then put the bracket that was NOT facing up back into position. It should fit into one of the holes the turret has. Then remove the venture block from the loader. Lastly, put the other bracket back into place on the black block.
 

BenBacon

Founder Of Bacon, Inc
Joined
Jan 15, 2017
Messages
1,548
Likes
2,214
Points
525
Location
Gulag
#34
Some new techs
A tech with my Mk1 engine module ( it is the tech that got changes )
Engine Concept Mk4.png

And a hover plane that cant increase altitude
Engine Plane Mk2.png
And an AI-compatible aircraft
HP 209 Mk2 PAS 5.png
HP- Hovering Punisher
209-Sounds Cool
Mk2- Second model with major changes
PAS- Protected, Armed, Stable
5- Fifth variation of this model

NOTE: A couple of hovers knocked off will result in it falling instantly
 

JimmyBlether

A Kerbal Demon
Joined
Jul 31, 2017
Messages
2,660
Likes
3,003
Points
570
Location
The Kraken's Lair
Website
tinyurl.com
#39