[0.7.8.1] Conveyor delay cause filter to work incorrectly

PVD

Well-Known Member
Aug 5, 2016
43
32
415
26
It takes some time for chunks to be putted into complex block, like silo or dropper, so conveyor line suspends and filter allows chunks to be passed.
  1. Place two same parallel conveyor lines.
  2. Add a scraper to the start of each conveyor.
  3. Add a silo to the end of each conveyor.
  4. Connect filter to the center of each conveyor which will extract everything from the conveyor.
  5. Connect first filter directly to the new silo, connect second to the new silo through 1 conveyor block.
  6. Put the same amount of the blocks to each scrapper.
  7. Second filter will allow chunks to pass it sometimes.

Video - https://drive.google.com/file/d/1HQHGxM-95n4yMn0JwPCnCFttoU8c0b9Z/view
 

ZeroGravitas

Breaker of Games
Jun 29, 2017
3,938
5,762
675
38
UK
www.youtube.com

Adriano

PAYLOAD STUDIOS
May 16, 2016
2,597
1,354
570
38
@ZeroGravitas I've logged it as a separate issue to the more common one of resources skipping past filters and refineries. It could be the exact same code that causes it, but logged it separately just in case.
 
  • Like
Reactions: ZeroGravitas